12mm 80 mm HSS Titanium Drill Bit Hole Saw Stainless Steel Metal Alloy Cutter
Product Name:Titanium coated high speed steel opener. Material: titanium coated high speed steel. Applicable range: 304 stainless steel under 2mm / 201 stainless steel under 2mm / iron plate under 3mm / aluminium plate under 3mm / all types of wood / density board / compressed board. Prohibited use: concrete / stone / tile / glass.
(1) 9341 Titanium Coated High Speed Steel. Titanium coated HSS made of high quality material, high precision rotary grinding teeth, hard and wear resistant / drilling accuracy / improve efficiency. (2) Easy to drill stainless steel, strong cutting ability, burr-free hole opening.
(3) High-precision rotary grinding, low resistance, high rotation speed, fine grinding of centre drills. (4) No drilling offset or oscillation, small size deviation.(5) Triangular anti-slip drill rod, effectively prevent slipping when drilling. 01 Clamping range of 10mm-13mm or more can be used. 02 The power of electric drill 750w or more can be used.
03 Prohibit the use of impact drills/hammers. In order to get a better cutting surface and prolong the life of the tool, please be sure to use high-precision, high rigidity, good dynamic balance of the equipment. (1) This hole opener is equipped with a positioning centre drill, which needs to be installed and tightened manually.(2) During hole cutting, the centre drill cuts first and the cutter head starts to work only after it is in place. The centre drill is used for positioning. (3) When cutting continuously, select a lower speed.
(4) To prevent chipping, do not allow the hole opener's cutting edge to hit the material being cut. (5) It is necessary to add water or coolant to reduce the temperature, otherwise there is a risk of burning the drill. (6) If abnormal vibration or sound occurs during cutting, reduce the spindle speed and cutting feed until the situation improves.
(7) The operator should wear protective glasses to protect his eyes. When working face up, a protective mask is required. (8) Earplugs are required to reduce the effects of noise during long term operation. (9) The hole opener is in a burning state after long-term operation, and care should be taken to avoid burning the skin when replacing it.
(10) After use, apply antirust oil for longer service life. (1) Due to the lighting effect and shooting angle and other reasons, the product has a colour difference, please understand. (2) Due to manual measurement, there are errors in product size. (3) You can find more products with different materials, types, colours, sizes, quantities and shapes in our shop. (4) If you have a big demand, you can find us a discount!